User`s guide
Chapter 04: Using Your Sahara NetSlate with Microsoft® Windows® 7 37
Edge Compensation
The edge compensation
sliders are used to adjust
your ability to reach the
extreme outer edges of the
screen. The four sliders in this
tab aect each of the four
corresponding edges of the
screen. Larger compensation
numbers will “stretch” reach-
able points on the screen
outward towards the extreme
edges, while smaller numbers
will pull back the points into
linearity.
If you are having diculty tapping on objects near the very
outer edges of the screen, or when you tap near a screen edge
the pointer is out of alignment (skewed either towards or away
from the edges) try adjusting these controls to compensate.
Tapping on the “Draw” button will open the Drawing Test. Tap on the “Menu”
button during the test to display a grid overlay, display the point coordinates of
where the screen is touched, or to clear the screen so you can start over.