User`s guide

ManualsBrandsVelocity ManualsComputer equipmentEdge GX545

Chapter 03: Battery Usage and Care 21

2. Disconnect the AC adapter and power on the tablet. Let the

batteries run down until the system automatically enters the

Suspend/Hybernation mode and shuts down.

3. Reconnect the AC adapter, let the batteries fully charge

(so both battery indicators glow green) and then run the

computer with the external power still connected for at

least a few hours before unplugging and running on battery

power.

The battery packs should now be properly calibrated. If you

nd that battery life doesn’t correspond to the battery status as

reported by your operating system, repeat steps 2 -3 again.

If after performing a calibration for a second time you still nd

you are having a problem with the battery life, you will need to

go into the BIOS and perform a hardware battery calibration.

1. To enter the BIOS, power on or restart your Sahara NetSlate

and press the L2 (Screen Rotation) button as soon as you see

the TabletKiosk logo.

2. Once in the BIOS, use the L3 button to navigate over to the

Advanced menu screen.

3. Use the L4

button to

go down to

the Battery

Calibration

item.

4. Press the R2

button to enter

the Calibration

routine. Make

sure the Sahara

NetSlate is attached to the AC Adapter and that the AC

adapter is plugged into an external power source and then

press any function button (except L1 and R1) to begin the

calibration.

→←: Select Screen

↑↓/Click: Select Item

Enter/Dbl Click: Select

+/-: Change Opt.

F1: General Help

F2: Previous Value

F3: Optimized Defaults

F4: Save ESC: Exit

Esc/Right Click: Exit

Main Advanced Boot Security Save & Exit

Configure SATA as [AHCI]

Wake on LAN from S4/S5 mode [Enable]

Enable/Disable CCD [Enable Both Side CCD]

Enable/Disable G sensor [Enable G-Sensor]

Programmable Buttons Settings

Disable/Enable Programmable Buttons [Enable]

3rd Programmable button [Brightness up]

4th Programmable button [Brightness down]

Fan Calibration

Battery Calibration

Intel(R) Fast Flash Standby

Trusted Computing

►

Select a configuration for

SATA Controller.