User`s guide
Chapter 06: Upgrading Your Sahara NetSlate 111
3. Remove the cover to
expose the expansion
module port.
4. Align the connector on the
module you wish to install
with the expansion port
on the Tablet PC.
Press down gently to
attach the module.
5. Use the two screws that
came with the module to
secure it to the Tablet PC.
To swap or remove a module,
simply remove the two (2)
screws holding the module in
place, remove the module and
then either attach a dier-
ent module (as per the above
procedure) or replace the expansion port’s cover for protection.
If the module you are installing came with its own set of screws,
be care not to lose the two screws that secure the expansion
port cover.