User guide

VPN Configuration
Rev 2.3 Feb.12 79
Figure 6-6: ACEmanager: VPN - VPN1- L2TP+IPsec
To configure each LTTP tunnel:
1. Configure PPP instance
2. Configure L2TP
• Local Address Type field changes to single address.
• Local Address will be carrier given address of the device (with a 24-bit
Netmask).
• Remote Address will be VPN gateway address with 24-bit Netmask.
3. Configure IPsec route
4. Configure static route - PPP Network IP and PPP Network Mask