User guide

VPN Configuration
Rev 2.3 Feb.12 77
Protocol Displays the protocol used for configuration. Only supports UDP.
Peer Port The Peer Port is the UPD port on the peer device.
Peer Identity Enter the IP address or Fully Qualified Domain Name (FQDN) of the peer device.
Encryption Algorithm Options: DES, Blowfish, DES, Cast128, AES-128, and AES-256
Authentication
Algorithm
Options: MD5, SHA-1, and SHA-256.
Compression Options: LZ0 or NONE.
Load Root Certificate Load Root Certificate loads the server root CA certificate. When the button is selected, a
window will pop-up and enable the user to browse and select the file containing the root CA
certificate.
Root Certificate Name The Root Certificate Name will display here.
User Name The user name required for client authentication.
User Password The user password required for client authentication.
Tunnel-MTU Default: 1500 bytes.
MSS Fix Default: 1400 bytes.
Fragment Default: 1300 bytes.
Allow Peer Dynamic
IP
Options: Enable or Disable.
Re-negotiation
(seconds)
Default: 24 hours.
Ping Interval
(seconds)
This is the keep-alive sent by the client. Default: 0 seconds.
Tunnel Restart
(seconds)
Enter the time for a tunnel restart (unit in seconds).
NAT Options: Enable or Disable. Note that this is a Carrier NAT, not a local NAT.
Field Description