User guide
LAN Configuration
Rev 2.3 Feb.12 65
Configure the AirLink Device to Support PPPoE
Note: You must disable the DHCP server for PPPoE to work.
• From the groups on the left, select PPPoE under LAN.
• Change Host Authentication Mode to 2.
• Enter a user name for PPP User ID for the PPPoE connection.
• Enter a password (PPP password) for the PPPoE to connection.
Tip: If you leave PPPUserID and PPPpasswordblank, any computer or device can
connect to the PinPoint device using PPPoE.
Note: ACEmanager shows the existing values for PPPUserID and PPPpassword
encrypted and character padded.
Optional: Configure *Device Name
a. In ACEmanager, select Dynamic DNS from the groups on the left, under
Services.
b. Enter a name for Device Name, such as AirLink device or the ESN.
The name you choose for Device Name will not affect the connection but may
need to be configured in PPPoE settings for the router, device, or computer you
will be connecting to your AirLink device.
Field Description
Host Authentication
Mode
Host Authentication Mode: Use PAP or CHAP to request the user login and password
during PPP or CHAP negotiation on the host connection. The username and password set
in *HOSTUID and *HOSTPW will be used.
• NONE (Default)
• PAP and CHAP
• CHAP
Host User ID Host User ID for PAP or CHAP.
• user id (up to 64 bytes)
Host Password Host Password for PAP or CHAP.