User guide

ALEOS 4.2.3 User Guide
28 20080616
Figure 3-2: ACEmanager: Status - Home - GSM
Status Field Description
Phone Number The phone number (programmed into the device) associated with the carrier account.
IP Address The current IP address of the device reported by the internal module, generally obtained from
your carrier. This is the address you can use to contact the AirLink device from the Internet if you
have a mobile terminated or Internet accessible account.
Network State Current state of the cellular radio network connection.
RSSI (dBm) The current RSSI (Receive Signal Strength Indicator) of the AirLink device as a negative dBm
value. Signal strength of the cellular signal. The higher the number, the better the signal
strength. The exact numbers vary between cellular carriers. However, -40dBm to -70dBm
usually means the AirLink Device is in an excellent coverage area.
Cell Info For GSM/HSPA only. Provides such cell information as the base station identity code (BSIC),
TCH, received signal strength indicator (RSSI), LAC, and the cell ID.
(Current) Network
Operator
Provides the name of the cellular carrier being used.
Network Service
Type
The type of service being used by the device, e.g., EV-DO Rev A or HSPA+.
ALEOS Software
Version
Version of ALEOS software currently installed in the device.
EC/IO (dB) Indicates the EC/IO signal quality measured in decibels.
Channel The current active CDMA/GSM channel number.
WAN/Cellular
Bytes Sent
Number of bytes sent to the network since system startup or reboot.
WAN/Cellular
Bytes Rcvd
Number of bytes received from the network since system startup.
Device Name Name of the device as it is configured with the Dynamic DNS IP Manager settings.