User guide

Configuring the AirLink Device
Rev 2.3 Feb.12 25
Figure 2-6: ACEmanager: Select and Upload Template
4. Click on Upload File to Modem.
5. Click on Load Template. As in the template creation process, there will be a
time delay as the template downloads.
Tip: After you load the template, it’s best to go back over the ACEmanager tabs to make
sure all the settings are what you require. Red asterisks (*) will display on the tabs that
have been changed. Make any adjustments to the settings as needed.
6. Click the Apply button on the toolbar to write the configuration to the device.
Figure 2-7: ACEmanager: Apply Changes Dialog Box
7. Click OK.
8. Click on the Reboot tab to reset the device.
Caution: Many of the configuration settings will not take effect until the device has been
reset.