User guide

ALEOS 4.2.3 User Guide
244 20080616
Serial Port
Table E-21: GPS: Serial Port
Command Description
*PPLATS Local ATS - Causes GPS reports to also be sent out the serial or Ethernet link
every n seconds, when there is a PPP connection to the serial host or a
connection to the Ethernet port is established.
• n=0 : Disable
• n=1-255 seconds
Tip: Sends to the PPP peer IP S110 with the Destination Port number S53.
*PPLATSR Indicates the type of GPS report to send to the local client (PPP/SLIP peer).
See *PPGPSR.
• n=0x11 : Standard GPS Report
• n=0x12 : Standard GPS Report + UTC Date
• n=0x13 : Standard GPS Report + UTC Date + RF data
• n=0xD0 : Xora reports.
• n=0xE0 : GGA and VTG NMEA reports
• n=0xE1 : GGA, VTG and RMC NMEA reports
• n=0xF0 : TAIP reports
• n=0xF1 : Compact TAIP data
*PPLATSEXTRA Have local ATS reporting (LATS) send up to 7 extra copies of a GPS report to
the subsequent ports.
• n=0 : Just the original report is sent (default).
• n=1-7 : Send GPS report copies to that number of ports.
Example: If AT*PPLATSEXTRA=7 and the port in S53 is 1000, then GPS
reports will be sent to ports 1000-1008.
*PGPS Send NMEA GPS strings out serial link. Similar to ATGPS except that the
*PGPS value can be saved to NVRAM so that it will continue to operate after
resets.
• n=0 : Disabled
• n=1 : Send NMEA GPS strings out serial link.
• n=2 : Send NMEA GPS strings out the USB port.
• n=3 : Send NMEA GPS strings out both the serial and the USB port.
*PGPSC Allows a PP to be configured to send GPS sentences out of the serial port
when the PP loses cellular coverage. This feature is configured by 2 fields.
This command controls the status of the sentences.
• n=0: Always sent
• n=1: Sent when out of cellular coverage
When set to 1, no reports are saved in SnF.