User guide

ALEOS 4.2.3 User Guide
242 20080616
Misc
*PPSNFM Store and Forward Minimum Reports. Specifies the minimum number of
reports that must be stored before they are forwarded to the server. The data
is then sent to the server in packets that contain at least this number of
reports.
• n=0-255
*PPMAXRETRIES Maximum number retries when in Simple Reliable Mode.
• n=0 : Disabled
• n=1-255 retries
Table E-19: GPS: Server 1 (Continued)
Command Description
Table E-20: GPS: Misc
Command Description
*PPMINTIME Specifies the minimum amount of time between reports generated due to
either the time interval (*PPTIME) or the distance interval (*PPDIST). This is
useful to limit network traffic and make more efficient use of bandwidth. This
can be used in conjunction with store and forward. The minimum value which
this setting can take depends on the policies of the carrier.
• n=0 : Disabled
• n=1-65535 seconds
*PPINPUTEVT Enable sending input changes as events (different report types).
• n=0 : Disable
• n=1 : Enable
*PPODOM Enable odometer reporting.
• n=0 : Disabled (default)
• n=1 : Enabled
*PPODOMVAL The current odometer value of the MP. The value is in meters. Maximum value
is approximately 4.3 billion meters (2.5 million miles). 1 mile is approximately
1600 meters.
• n=meters
*PPTAIPID Sets/queries the TAIP ID. This ID is returned in TAIP reports if it has been
negotiated with the TAIP client. This value is only used in conjunction with
TAIP emulation mode (*PPGPSR=F0).
• nnnn=TAIP ID (4 characters)
*PPFLUSHONEVT Flushes store and forward buffer when an input event (DTR/RTS) occurs.
• n=0 : Disable
• n=1 : Enable