User guide

ALEOS 4.2.3 User Guide
234 20080616
PassThru
*HOSTPEERIP Set or query the IP address that can be used to directly contact the MP device
once a cellular connection is established. If this value is not specified,
192.168.13.31 will be used.
• d.d.d.d=local or peer IP address of the device.
Note: This is not normally used nor needed by user applications.
*HOSTNETMASK Subnet mask for the host interface. Allows communication with a subnet
behind the host interface.
• n.n.n.n = subnet mask, example 255.255.255.0.
*HOSTAUTH Host Authentication Mode: Use PAP or CHAP to request the user login and
password during PPP or CHAP negotiation on the host connection. The
username and password set in *HOSTUID and *HOSTPW will be used.
• n=0 : Disable PAP or CHAP request (Default).
• n=1 : PAP and CHAP.
• n=2 : CHAP
*HOSTUID Host User ID for PAP, or CHAP, or PPPoE.
• string=user id (up to 64 bytes)
*HOSTPW Host Password for PAP, or CHAP, or PPPoE.
• string=password
*DHCPSERVER DHCP Server Mode
Table E-12: Common: PPP/Ethernet (Continued)
Command Description
Table E-13: Common: PassThru
Command Description
*PTINIT Any AT Command string to be passed to the OEM module before entering
PASSTHRU mode, e.g. AT&S1V1, etc.
• string=AT command(s)
*PTREFRESH Number of minutes of inactivity in PASSTHRU mode to resend the *PTINIT
string to the hardware module.
• n=0 : Disabled
• n=1-255 minutes