User guide

Rev 2.3 Feb.12 229
TCPS TCP connection time-out (TCPS) units. Specifies a time interval upon which if
there is no in or outbound traffic through a TCP connection, the connection will
be terminated.
• n=0 : minutes
S221 Connect Delay: Number of seconds to delay the “CONNECT' response upon
establishing a TCP connection. OR Number of tenths of seconds to delay
before outputting ENQ on the serial port after the CONNECT when the ENQ
feature is enabled.
• n=0 - 255
S60 Telnet Client Echo Mode.
• n=0 : No Echo
• n=1 : Local Echo (Default)
• n=2 : Remote Echo
*ENQ Outputs an ENQ [0x05] after the TCP CONNECT delayed by the Delay
Connect Response time (S221).
• n=0 : Disabled (Default).
• n=1 : Enable ENQ on CONNECT.
Table E-8: Common: TCP (Continued)
Command Description