User guide

ALEOS 4.2.3 User Guide
226 20080616
USB
Serial
*NETPHONE? Phone Number
The device’s phone number, if applicable or obtainable.
*HOSTPAP Request PAP
Use PAP to request the user login and password during PPP negotiation on
the host connection.
n=0 : Disable PAP request (Default).
n=1 : Takes user login and password from Windows connection and copies to
*NETUID and *NETPW.
Table E-5: Common: Misc (Continued)
Table E-6: Common: USB
Command Description
*USBDEVICE USB Device Mode
This parameter alters the default startup data mode.
Table E-7: Common: Serial
Command Description
*S23 Configure Serial Port
Format: [speed],[data bits][parity][stop bits]
Valid speeds are 300-115200, data bits: 7 or 8, parity: O,E,N,M, stop bits:
1,1.5,2
\Q
Serial Port Flow Control Set or query the serial port flow control setting.
•n=0 : No flow control is being used.
•n=1 : RTS/CTS hardware flow control is being used.
•n=4 : Transparent software flow control. Uses escaped XON and
XOFF for flow control. XON and XOFF characters in data stream
are escaped with the @ character (0x40). @ in data is sent as
@@.
Set or query the serial port flow control setting.
• n=0 : No flow control is being used.
• n=1 : RTS/CTS hardware flow control is being used.
• n=4 : Transparent software flow control. Uses escaped XON and XOFF
for flow control. XON and XOFF characters in data stream are escaped
with the @ character (0x40). @ in data is sent as @@.
V Command Response Mode.
• n=0 : Terse (numeric) command responses
• n=1 : Verbose command responses (Default).