User guide

Rev 2.3 Feb.12 19
2
2: Configuring the AirLink Device
Main Menu Tabs
Configuring
Operation Modes
Creating a
Tem pla t e
Applying a
Tem pla t e
After powering on the AirLink device, and ensuring that you have an
IP-based connection set up (Ethernet or USB/net), you can log on to
ACEmanager. In your browser, either enter http://192.168.13.31:9191
or another IP address depending on the interface you select. (See
table below.)
Note: The connected device for Ethernet is not always .100. It can be
anything between 100 - 150.
The login defaults are:
User Name: user (or viewer)
Password: 12345
The “user” login is used for configuring or monitoring. The “viewer”
login can view the configuration and connection state but not change
the configuration in any way.
To prevent others from changing the AirLink device settings, you can
change the ACEmanager password. (Refer to the Admin chapter.)
Figure 2-1: ACEmanager: Main Login screen
Interface AirLink device Connected Device
Ethernet 192.168.13.31 192.168.13.100
USB/NET 192.168.14.31 192.168.14.100