User guide

Admin
Rev 2.3 Feb.12 167
Use View Log for troubleshooting purposes (e.g., when setting up the IPsec
configuration). The Log page will allow you to establish the tunnel connection and
monitor the results directly. To change the intervals at which the log is displayed,
change the settings in Auto Refresh.
Field Description
Logging Logging enables the user to configure log verbosity and display filtering for various
subsystems. Sub System fields are:
•
WAN/Cellular
• LAN
• VPN
• Security
• Services
• Events Reporting/OPS
• Serial
• Applications
• UI
• AMS
• Admin
• System
Separate filters, based on subsystem and severity, are applied when the messages are
generated and when the messages are displayed. Four severity levels are supported for
filtering in the drop-down lists for Verbosity: Critical, Error, Info (information), and Debug.
(Note: The VPN Sub System only allows for Info and Debug.) The user also has the option
(Yes or No) of which Sub System fields to display in the log.
Linux Syslog A Linux Syslog can be displayed. Options:
• No Display
• Display
Default: No Display