User guide

ALEOS 4.2.3 User Guide
154 20080616
Field Description
General
Data Service If Data Service is on, “Available” displays on the user interface. If data
usage exceeds the configured data limit, “Not Available” displays on
the screen.
Daily Limit
Daily Limit (MB) This is the user specified daily data usage (in MBs) limit (24 hour limit).
The user can specify data usage limits on a daily or monthly basis. A
limit is essentially a threshold that can trigger the software to take a
user specified action if the usage goes above the threshold.
Note: The Daily Limit value MUST be expressed as an integer (i.e., a
whole number) and NOT as a fraction (e.g., “3.5”).
Current Daily Usage
(MB)
Displays the current daily data usage (in MBs). For example, if the
daily limit is 60, the current daily usage should not exceed 60. The
usage limit is 90%. You cannot access the cellular world if you exceed
the limit. You can, however, Telnet, OTA, etc.
Monthly Limit
Monthly Limit Units Select an MB or GB unit for monthly data usage. Default: MB.
Monthly Limit This is the user specified monthly data usage limit. Data usage
accumulates on a monthly basis and on the date specified by the user
(the “rolling month”). Data usage will accumulate during the month until
the end of the next billing period at which point the data usage totals
will be reset.
Note: The Monthly Limit value MUST be expressed as an integer (i.e.,
a whole number) and NOT as a fraction (e.g., “3.5”)
Current Monthly
Usage (MB)
Displays the current monthly data usage.
Start of Billing Cycle
(Day of Month)
Enter the desired start of the billing cycle. For example, 3 (Day 3 of
every month).