User guide

ALEOS 4.2.3 User Guide
148 20080616
Advanced
Assert DSR Assert DSR always when the device is in a data mode (UDP, TCP, etc.), or when the device
is in network coverage. Options are:
• Always
• In Data Mode
• In Coverage
Default: Always
Assert DCD Assert DCD always, or when the device is in a data mode (UDP, TCP, etc.) or when the
device is in network coverage. Options are:
• Always
• In Data Mode
• In Coverage
Default: Always
Enable CTS Assert CTS when there is network coverage. Options:
• Disable
• Enable
Default: Disable
DTR Mode Use DTR from the serial device, or ignore DTR (same as S211). Options:
• Use DTR
• Ignore DTR
Default: Ignore DTR
Quiet Mode Disable or enable display of device responses. Options:
• Disable
• Enable
Default: Disable
AT Verbose Mode Configure AT command responses. Options:
• Verbose
• Numeric
Default: Verbose
Call Progress Result
Mode
When enabled adds 19200 to CONNECT messages. Options:
• Disable
• Enable
Default: Disable.
Convert 12 digit
Number to IP Address
Converts 12 digit number to an IP address 111222333444 -> 111.222.333.444. Options:
• Use as Name
• Use as IP
Default: Use as Name.
Table 11-1: Serial Port Configuration
Field Description