User guide

Rev 2.3 Feb.12 145
11
11: Serial Configuration
• Port Configuration
• MODBUS Address
List
The Serial tab that displays in ACEmanager is applicable to all
AirLink devices with a serial port.
Most AirLink devices are equipped with a serial port. This port can be
used to connect devices or computers using a DB9-RS232
connection.
Note: These commands are specific to the RS232 port and generally do not
apply to the USB/serial.
Port Configuration
The Serial group includes commands specific to general use of the
serial port.
Serial Port Configuration consists of four categories of configurable
parameters:
• Port Configuration
• Advanced
• TCP
• UDP
These categories and their parameters are shown in Figures 11-1
and 11-2, and described in Table 11-1.