User guide

GPS Configuration
Rev 2.3 Feb.12 123
Stationary Vehicle
Timer (mins)
Timer for Stationary Vehicles. Time interval in minutes that the AirLink device will send in
reports when it is stationary.
• n=0: Disabled
• n=1-255 minutes
For example, if *PPTIME=10, the AirLink device will send in reports at least every 10
seconds while it is moving; however, once it stops moving, it will slow the reports down to
this *PPTSV value.
Note: In order for the PPTSV (Stationary Vehicle timer) to take effect, the PPTIME value
must be set to a value greater than 0 and less than the PPTSV value. The PPTSV timer
checks for vehicle movement at the PPTIME interval, so if PPTIME is disabled, then
PPTSV will also be disabled.
Maximum Speed
Event Report (kph)
Specifies the speed which will trigger Maximum Speed Event Report in kilometers per hour.
Send Stationary
Vehicle Event in
Seconds
Specifies the time (in seconds) in which a Stationary Vehicle Event should be sent.
Enable Digital Input
Event
Allows you to enable or disable digital input events.
• Disable
• Enable
Default: Disable
Report Type
GPS Report Type Sets the type of GPS Report:
• GPS Data
• GPS+Date
• GPS+Date+RF
• GPS+Date+RF+EIO
• NMEA GGA+VTG
• NMEA GGA+VTG+RMC
• TAIP data
• Compact TAIP data
• TAIP LN report
• TAIP TM report
Default: GPS+Date
Table 9-1: GPS: Server 1
Field Description