User guide

Services Configuration
Rev 2.3 Feb.12 105
Control Only
The ALEOS SMS Mode Control Only feature allows some remote management of
the AirLink device with SMS messaging. SMS allows users to:
Retrieve current device status
Reset the AirLink device
Control the relay I/O.
When an SMS command is received, the AirLink device performs the action
requested and sends a response back to that same phone number from which it
received the SMS.
SMS Command Device Action SMS Response
Note: All responses start with “reply from [modem name]:”
status None status IP
[Network IP] [Network Status]:
[technology type] RSS signalled
Lat = [Latitude]
Long = [Longitude]
Time = [hh:mm:ss]
reset Resets the device 30
seconds after the first
response message is
sent.
First message: Reset in 30 seconds
Second message: Status message when back up.
relay x y Sets the applicable
relay to the desired
setting.
relay x set to y
x can be 1
y can be 0 or 1 (Off or Drive active low)
Status