Specifications
MP 700 Series GPS AT Command Reference
86 2130309
+COPS (continued) Operator selection (continued)
<status> returns the status of an operator:
• <status>=0: Unknown
• <status>=1: Available
• <status>=2: Current
• <status>=3: Forbidden
+CPAS Modem activity status
Returns the activity status of the Sierra Wireless modem in the form: +CPAS:
<n>. The command can be used to interrogate the modem before requesting
action from it.
Supported values
<n> can have one of six values:
• <n>=0: Ready to accept commands.
• <n>=2: Unknown—may not respond to commands.
• <n>=3: Ringing—the modem is ready for commands, but the ringer is
active.
• <n>=4: Call in progress—the modem is ready for commands, but a call is in
progress.
+CPBF=<string>
+CPBF=?
Find phonebook entries
Searches the phonebook memory (as selected in +CPBS, see page 87) for the
text specified in <string>. Returns all results matching or beginning with
<string>, in the following form:
+CPBF: <index>,<number>,<type>,<text>
If more than one entry returns, each one appears on a separate line.
The +CPBF=? command returns the maximum lengths of the <number> and
<text> parameters, both as integers:
+CPBF: <nlength>,<tlength>
Note: If +CPBS has set the phonebook memory to use the SIM card,
parameter lengths may not be available.
Continued on next page.
Table 3-9: Command Reference Table (ASCII Alphabetic)
Command Description