Specifications

MP 700 Series GPS AT Command Reference
76 2130309
+CLIR (continued) Calling line identification restriction (continued)
Note: CLIR can only be invoked and suppressed if subscription to the service
allows for it.
+CLIR? returns the current setting and CLIR network status:
+CLIR:0,0 CLIR default, CLIR not provisioned on network
+CLIR:0,1 CLIR default, CLIR provisioned (permanent mode)
+CLIR:0,2 CLIR default, CLIR network status unknown
+CLIR:0,3 CLIR default, CLIR presentation restricted (temporary)
+CLIR:0,4 CLIR default, CLIR presentation allowed (temporary)
+CLIR:1,0 CLIR invoked, CLIR not provisioned on network
+CLIR:1,1 CLIR invoked, CLIR provisioned (permanent mode)
+CLIR:1,2 CLIR invoked, CLIR network status unknown
+CLIR:1,3 CLIR invoked, CLIR presentation restricted (temp)
+CLIR:1,4 CLIR invoked, CLIR presentation allowed (temp)
+CLIR:2,0 CLIR suppressed, CLIR not provisioned on network
+CLIR:2,1 CLIR suppressed, CLIR provisioned (permanent)
+CLIR:2,2 CLIR suppressed, CLIR network status unknown
+CLIR:2,3 CLIR suppressed, CLIR presentation restricted (temp)
+CLIR:2,4 CLIR suppressed, CLIR presentation allowed (temp)
+CMEE=<n>
+CMEE?
Report mobile equipment error
Sets whether the modem reports errors as simply ERROR, or with details in the
form +CME ERROR: <err> (either numeric or verbose).
Note: Regardless of how this is set, an ERROR is returned in certain cases
(such as if the wrong syntax or an invalid parameter is used).
Supported values
<n> can be set to one of three values:
• <n>=0: Do not report detailed errors, simply return ERROR.
• <n>=1: Enable +CME ERROR: <err> result codes and use numeric values
for <err>.
• <n>=2: Enable +CME ERROR: <err> result codes and use verbose
(English) values for <err>.
Numeric and verbose values for <err> appear on page 106.
+CMEE? returns the current setting.
Table 3-9: Command Reference Table (ASCII Alphabetic)
Command Description