Specifications

MP 700 Series GPS AT Command Reference
56 2130309
!MPSETUP=
<index>,<label>,
<username>,
<password>,
<apn>
Configure a GPRS profile
The MP 700 Series GPS allows for up to three GPRS profiles. See the Software
Installation, Configuration, and Integration Guide on the MP 700 Series GPS
CD for more detailed information about profiles. (The username, password, and
APN should be obtained from your service provider.)
Parameter settings
The supported values are:
• Profile number <index>=
1 Profile 1
2 Profile 2
3 Profile 3
• Description of profile <label>=
32 character string
• Username <username>=
32 character string
• Password <password>=
32 character string
• Access Point Name <apn>=
100 character string
Unless the user explicitly selects a different profile, the default profile is used to
establish GPRS connections. (See !MPSETDFLT above.)
!MPSIMSLED? Report the status of the SIM sled
The status returned is either:
• 0 Closed—the sled is fully inserted
• 1 Open—the sled is not fully inserted
(This does not indicate whether there is a SIM in the sled.)
Table 3-9: Command Reference Table (ASCII Alphabetic)
Command Description