Specifications

Command Reference
Rev 3.2 Oct.05 107
Factory Default Settings
&F (Reset modem to factory default) restores these settings,
overwriting any that currently differ from the factory defaults.
Table 3-12: Profile settings
Command Description Factory
&C Data carrier detect (DCD) options 1
&D Data terminal ready (DTR) options 2
+CBST Select bearer service type 7,0,1
+CCWA Call waiting control 0
+CLIP Calling line identification
presentation
0
+CLIR Calling line identification restriction 0
+CMEE Report mobile equipment error 0
+CMGF Select SMS message format 0
+CNMI New SMS message indications 2,1,0,0,0
+CR Service reporting control 0
+CRC Cellular result codes for incoming
calls
0
+CREG GSM network registration 0
+CRLP Radio link protocol 61,61,48,6,1,3
+CSDH Show SMS text mode parameters 0
+CSMS SMS message service 0
+DR V.42bis compression reporting 0
+DS V.42bis compression control 3,0,512,20
+IFC Local flow control 2,2
+IPR Fixed local data rate 115200
E Command echo mode 1
L Set speaker loudness (ignored) 0
M Set speaker mode (ignored) 0
Q Quiet—suppress result codes 0
V Verbose result code format 1