Operating instructions

Appendix
A.2 Parameter macros
Drive converter cabinet units
518 Operating Instructions, 10/2008, A5E00288214A
Sink Source
Parameter Description DO Parameter Description DO
p0748.12 Invert DI/DO12 CU 0 Not inverted
p0728.12 Set DI/DO12 input or output CU 1 Output
p0743 DI/DO13 CU r0899.6 Switching on inhibited Vector
p0748.13 Invert DI/DO13 CU 1 Inverted
p0728.13 Set DI/DO13 input or output CU 1 Output
p0744 DI/DO14 CU 1 +24 V CU
p0748.14 Invert DI/DO14 CU 0 Not inverted
p0728.14 Set DI/DO14 input or output CU 1 Output
p0745 DI/DO15 CU r2138.7 Ack. fault Vector
p0748.15 Invert DI/DO15 CU 0 Not inverted
p0728.15 Set DI/DO15 input or output CU 1 Output
p2103 Acknowledge fault 1 TM31 0 TM31
p2104 Acknowledge fault 2 TM31 r4022.3 TM31 DI3 TM31
p4030 DO0 TM31 r0899.11 Pulses enabled Vector
p4031 DO1 TM31 r2139.3 Fault Vector
p4048.1 Invert DO1 TM31 1 Inverted
p4038 DO8 TM31 r0899.0 Ready for switching on Vector
p4028.8 Set DI/DO8 input or output TM31 1 Output
p4039 DO9 TM31 0 TM31
p4028.9 Set DI/DO9 input or output TM31 0 Input
p4040 DO10 TM31 0 TM31
p4028.10 Set DI/DO10 input or output TM31 0 Input
p4041 DO11 TM31 0 TM31
p4028.11 Set DI/DO11 input or output TM31 0 Input