Operating instructions

Mechanical installation
3.3 Installation
Drive converter cabinet units
Operating Instructions, 10/2008, A5E00288214A
37
Required tools
To install the connections, you will require:
● Spanner or socket spanner (w/f 10)
● Spanner or socket spanner (w/f 13)
● Spanner or socket spanner (w/f 16/17)
● Spanner or socket spanner (w/f 18/19)
● Hexagon-socket spanner (size 8)
● Torque wrench up to 50 Nm
● Screwdriver, size 2
● Screwdriver Torx T20
● Screwdriver Torx T30
3.3.3 Installation
Lifting the cabinet off the transport pallet
The applicable local guidelines regarding the transportation of the cabinet from the transport
palette to the installation location must be observed.
A crane transport assembly (option M90) can also be fitted on the top of the cabinet.
The fixing screws on the transport pallet can be removed from the pallet base without having
to raise the cabinet unit. The positions of the fixing screws are indicated by red markings on
the outside of the pallets.
Installation
Four holes for M12 screws are provided on each cabinet panel to secure the cabinet to the
ground. The fixing dimensions are specified on the dimension drawings enclosed.