Operating instructions

Device overview
2.5 Type plate
Drive converter cabinet units
Operating Instructions, 10/2008, A5E00288214A
29
Explanation of the option short codes
Table 2- 3 Explanation of the option short codes
Input options
L00 Line filter for use in the first environment to EN 61800-3, category C2 (TN/TT systems)
L26 Main circuit breaker incl. fuses for output currents < 800 A
Output options
L08 Motor reactor
L10 dv/dt filter plus Voltage Peak Limiter
L15 Sine-wave filter (only for 380 V – 480 V 3 AC, max. 250 kW)
Input and output options
M70 EMC shield bus
Motor protection and safety functions
L45 EMERGENCY OFF pushbutton installed in the cabinet door
L57 EMERGENCY OFF category 0, 230 V AC or 24 V DC
L59 EMERGENCY STOP category 1, 230 V AC
L60 EMERGENCY STOP category 1, 24 V AC
L83 Thermistor motor protection unit with PTB approval
L84 Thermistor motor protection unit with PTB approval
L86 PT100 evaluation unit
L87 Insulation monitoring
M60 Additional shock protection
Increase in degree of protection
M21 Degree of protection IP21
M23 Degree of protection IP23
M43 Degree of protection IP43
M54 Degree of protection IP54
Mechanical options
M06 Base 100 mm high, RAL 7022
M07 Cable compartment 200 mm high, RAL 7035
M13 Line connection from above
M78 Motor connection from above
M90 Crane transport assembly (top-mounted)
Other options
G20 CBC10 Communication Board
G33 CBE20 Communication Board
G61 Customer terminal block extension TM31
K46 Sensor Module Cabinet-Mounted SMC10
K48 Sensor Module Cabinet-Mounted SMC20
K50 Sensor Module Cabinet-Mounted SMC30
K51 VSM10 Voltage Sensing Module Cabinet-Mounted
K82 Terminal module for controlling the "Safe Torque Off" and "Safe Stop 1" safety functions
L19 Connection for external auxiliary equipment