Operating instructions

Setpoint channel and closed-loop control
7.4 Vector speed/torque control with/without encoder
Drive converter cabinet units
274 Operating Instructions, 10/2008, A5E00288214A
This function is activated automatically if quick commissioning is exited with p3900 > 0, or if
automatic calculation is called (p0340 = 1, 3, 5 or p0578 = 1).
Function diagram
FP 6730 Interface to Motor Module
Parameter
• p0305
Rated motor current
• r0331
Motor magnetizing current/short-circuit current
• p0500
Technology application
• p0578
Calculating technology/unit-dependent parameters
• p1610
Torque setpoint static (SLVC)
• p1611
Supplementary accelerating torque (SLVC)
• p1750
Motor model configuration
• p1755
Motor model changeover speed encoderless operation
• p1756
Motor model changeover speed hysteresis
• p1758
Motor model changeover delay time, closed/open-loop control
• p1759
Motor model changeover delay time open/closed loop control