Operating instructions

Commissioning
5.3 Procedure for commissioning via STARTER
Drive converter cabinet units
150 Operating Instructions, 10/2008, A5E00288214A
Figure 5-26 Entering the encoder data (option K50)
⇒ In the Encoder name: field, enter a name of your choice.
⇒ Click the Select standard encoder from list radio button and select one of the available
encoders.
● Standard encoders with code numbers 1xxx are provided for selection when encoder
module SMC10 is fitted (option K46).
● Standard encoders with code numbers 2xxx are provided for selection when encoder
module SMC20 is fitted (option K48).
● Standard encoders with code numbers 3xxx are provided for selection when encoder
module SMC30 is fitted (option K50).