Operating instructions

Drive converter cabinet units
Operating Instructions, 10/2008, A5E00288214A
15
Safety information
1
1.1 Warnings
WARNING
Hazardous voltages are present when electrical equipment is in operation.
Severe personal injury or substantial material damage may result if these warnings are not
observed.
Only qualified personnel are permitted to work on or around the equipment.
This personnel must be thoroughly familiar with all warning and maintenance procedures
described in these operating instructions.
The successful and safe operation of this device is dependent on correct transport, proper
storage and installation, as well as careful operation and maintenance.
National safety guidelines must be observed.
DANGER
Five safety rules
When carrying out any kind of work on electrical devices, the "five safety rules" must
always be observed:
1. Disconnect the system.
2. Protect against reconnection.
3. Make sure that the equipment is de-energized.
4. Ground and short-circuit.
5. Cover or enclose adjacent components that are still live.
Certification
The following certificates:
● EC declaration of conformity
● Certificate of compliance with order
● EC manufacturer's declaration
can be found under "Safety and Operating Instructions" in the documentation folder.