Operating instructions

Commissioning
5.3 Procedure for commissioning via STARTER
Drive converter cabinet units
140 Operating Instructions, 10/2008, A5E00288214A
Configuring the motor – Selecting the motor type
Figure 5-18 Configuring the motor – Selecting the motor type
⇒ In the Name field, enter a name of your choice for the motor.
⇒ From the selection box next to Motor type: select the appropriate motor for your
application
⇒ In the Parallel connection motor field, enter the number of motors connected in parallel, if
necessary. Motors connected in parallel must be of the same type and size.