Operating instructions

Commissioning
5.3 Procedure for commissioning via STARTER
Drive converter cabinet units
Operating Instructions, 10/2008, A5E00288214A
133
Configuring the drive unit
Figure 5-13 Configuring the drive unit
⇒ Under Connection voltage, choose the correct voltage. Under Cooling type: choose the
correct cooling type for your drive unit.
Note
In this step, you make a preliminary selection of the cabinet units. You do not define the line
voltage yet.
⇒ A list is now displayed under Drive unit selection:. Choose the corresponding drive unit
according to type (order no.) (see type plate).
⇒ Click Continue >