User guide

ALEOS 4.3.4 Software Configuration User Guide
96 4114514
c. In the Host Password field, enter a password for the PPPoE to
connection.
4. Click Apply.
5. Reboot the device.
Tip: If you leave Host User ID and Host Password blank, any computer or device can
connect to the AirLink device using PPPoE.
Note: ACEmanager shows the existing value for the PPPoE password as stars (****).
Optional: Configure the Device Name
1. In ACEmanager, go to Services > Dynamic DNS.
2. In the Service field, select IP Manager.
3. Under Dynamic IP, enter a name in the Device Name field, such as AirLink
device or the ESN. The name can be up to 20 characters long.
The name you choose for Device Name does not affect the connection, but
may need to be configured in PPPoE settings for the router, device, or com-
puter you connect to your AirLink device.
Configuring a PPPoE Connection in Windows 7
1. In Windows 7, go to Start > Control Panel.
Figure 4-28: Windows 7: Control Panel
2. Select Network and Internet.