User guide

LAN/Wi-Fi Configuration
Rev 1 Oct.13 91
Field Description
WiFi Mode
WiFi Client Mode Allows you to choose the connection mode type. Options are:
• Automatic (default)—the WAN connection automatically switches from cellular to
Wi-Fi whenever the Wi-Fi connection has been established
• Manual
To connect in manual mode:
1. Open ACEview and go to Menu > View > Wi-Fi.
2. ACEview displays a list of available access points. and the connection state.
3. Select an available AP, and click Connect.
A message window appears asking if you wish to connect the available Access Point.
4. Click OK.
Note: Whenever changing the Wi-Fi Client Mode from Automatic to Manual or Manual to
Automatic, you must reboot the device.
Available AP Identifies the currently available access point
Only one AP is shown, even if additional ones are configured. If there is more than one AP
available in the area, the one that is highest in the configuration order (in the ACEmanager)
is displayed.