User guide

ALEOS 4.3.4 Software Configuration User Guide
90 4114514
Client Mode
Client Mode allows a mobile AirLink GX Series device to use a Wi-Fi Client
connection to connect to an access point, rather than acting as an access point.
Client Mode has been tested with the top 5 WLAN Access Point vendors: Cisco
®
,
Aruba Networks
®
, Motorola™, HP
®
, and NETGEAR
®
.
You can configure up to 8 Access Points for each AirLink GX Series device. Only
one Access Point is used at a time for the client connection. Having additional
APs configured allows for portability.
Select Client Mode from the drop-down box in the WiFi Mode field, and click “+”
beside Client Mode to expand that section.
Figure 4-24: ACEmanager: LAN/WiFi > WiFi > Client Mode > Automatic