User guide

LAN/Wi-Fi Configuration
Rev 1 Oct.13 81
3. Select the Hardware tab, and click the Device Manager button.
Figure 4-13: System Properties
4. Click the + in front of Network Adapters.
The newly installed driver, AirLink USB Ethernet/RNDIS, should appear. If the
driver is shown with a # and number behind the driver name (e.g., AirLink USB
Ethernet/RNDIS #2), more than one is installed on your computer, most likely for
a different USB port. More than one copy of the driver should not cause any
problems since only the connected port and its driver would be active.
Figure 4-14: Device Manager > Ethernet
Once the driver is installed, you can use the USB port just like a standard
Ethernet port.
Virtual Serial
Verify the installation by looking in the Device Manager.