User guide

LAN/Wi-Fi Configuration
Rev 1 Oct.13 79
Figure 4-7: Found New Hardware Wizard
1. To start the install of the USB virtual Ethernet driver, select No, not this time
and click Next.
2. Select Install from a list of specific location and click Next.
Figure 4-8: Hardware Wizard: Location options
3. Select and/or enter the location of the driver.
· If the driver is on the CD and the CD is in your drive, you can just select
Search removable media.
· If you have installed ACEmanager or the Setup Wizard, the drivers have
been conveniently copied to your hard drive. Enter C:\Program
Files\Common Files\AirLink as the location to search.
· If you are installing the driver from a file downloaded from the Sierra
Wireless website, select Include this location in the search and type in the
location where you downloaded the file.
4. Click Next.
Figure 4-9: Hardware Wizard: Install location
After you select the location, the installation should begin. If you get a message
asking if you want to continue the installation, click Continue Anyway.