User guide

ALEOS 4.3.4 Software Configuration User Guide
44 4114514
Signal Strength
(RSSI)
Received Signal Strength Indicator
The averaged received signal power measured in the air interface channel
Indicates if there is a strong signal available for my device to connect to
See also LTE Signal Strength (RSRP) and LTE Signal Quality (RSRQ).
The value varies, depending on the network characteristics and the AirLink device.
LTE Signal
Strength (RSRP)
Reference Signal Received Power
The average signal power of all cell-specific reference signals within the LTE channel
Indicates whether the AirLink device has a strong connection to the wireless network
The value varies, depending on the network characteristics and the AirLink device.
See also LTE Signal Quality (RSRQ) and Signal Strength (RSSI).
Cell Info Provides cell information such as the Base Station Identity Code (BSIC), TCH, Received Signal
Strength Indicator (RSSI), Location Area Code (LAC), and the cell ID
For additional information, including cell info for LTE networks, see *CELLINFO2? on page 323.
Current Network
Operator
Provides the name of the Mobile Network Operator whose network the AirLink device is
connected to.
Note: The roaming operator is only displayed if the home operator allows this.
Network Service
Type
The type of service being used by the device. Options are:
EV-DO Rev A, 1x, LTE, HSPA+, HSPA, HSDPA, HSUPA, UMTS, EDGE, or GPRS
If you are connected to a network other than that of your Mobile Network Operator, the network
service type indicates that you are roaming (and additional charges may apply).
RSSI Signal strength
> -70 dBm Excellent
-70 dBm to -85 dBm Good
-86 dBm to -100 dBm Fair
< -100 dBm Poor
RSRP Signal strength
> -90 dBm Excellent
-90 dBm to -105 dBm Good
-106 dBm to -120 dBm Fair
< -120 dBm Poor