User guide

Rev 1 Oct.13 373
Admin
*DATAPREVDAY? Query the data usage for the previous day (in KB).
*DATAUSAGEENABLE Query or set enabling Data Usage.
AT*DATAUSAGEENABLE? to query
AT*DATAUSAGEENABLE=n to set
• n=0—Data Usage disabled
• n=1—Data Usage enabled
*GARMINATTACH Query or set the ability to connect a Garmin device to the serial port (so the Garmin
device can communicate with a remote server). For more information, see Garmin on
page 248.
AT*GARMINATTACH? to query
AT*GARMINATTACH=n to set
• n=0—Disable
• n=1—Enable
*GARMINSTATUS? Query Garmin device attachment status.
Table D-13: Applications > Data Usage Commands
Command Description
Table 4-14: Admin > Advanced Commands
Command Description
*BLOCK_RESET_CONFIG Query or set the ability to block resetting the device to factory default settings using
the hardware Reset button.
AT*BLOCK_RESET_CONFIG? to query
AT*BLOCK_RESET_CONFIG=n to set
• n=0—Reset button can be used to reset the device to factory default settings.
(default).
• n=1—Device cannot be reset to factory default settings using the Reset button
on the device.
Note: This command only blocks the ability to reset to defaults using the Reset
button on the device. You can still reset the device to the factory default settings
using the “Reset to Factory Default” button in ACEmanager or the *RESETCFG AT
command.
*BOARDTEMP? Query the temperature of the internal hardware, in degrees Celsius.
*DATE? Query the internal clock. The date and time are always specified in a 24-hour
notation.
AT*DATE? to query
Note: In AirLink devices, the GPS and/or cellular connection is used to set the time.