User guide

ALEOS 4.3.4 Software Configuration User Guide
36 4114514
8. Click Upload Radio Firmware.
The radio module firmware may take 10 to 20 minutes to upload and install.
Important: Do not disconnect the AirLink device from the computer or reboot the device
while the firmware update is in progress. During the radio module firmware update, the
device LEDs flash rapidly in sequence (an LED chase or caterpillar). When the radio
module firmware update is complete, the device reboots automatically.
If you see a message saying that the connection has timed out, ignore the
message and continue to wait for the device to reboot.
If you clicked OK when you saw the timed out message and logged back in,
you’ll see the old version of the firmware. The firmware update process is still
going on, so DO NOT reset the device or disconnect the power. DO NOT click
Cancel. Continue to wait the 10 to 20 minutes for the radio module firmware
update to complete. The device reboots once the firmware update is com-
plete.
Figure 2-20: Radio module firmware update in progress
9. When the update is complete, the AirLink device reboots and you are
returned to the Login screen.