User guide

ALEOS 4.3.4 Software Configuration User Guide
352 4114514
*SNMPTRAPSECLVL Query or set the SNMP TRAP security level in SNMPv3.
AT*SNMPTRAPSECLVL? to query
AT*SNMPTRAPSECLVL=n to set
• n=0—none
• n=1—authentication only
• n=2—authentication + privacy
*SNMPTRAPUSER Query or set a SNMP TRAP username string in SNMPv3.
Email (SMTP) Commands
*SMTPADDR Query or set the mail server IP address or FQDN.
AT*SMTPADDR? to query
AT*SMTPADDR=[d.d.d.d] or [NAME] to set
• d.d.d.d=IP Address
• NAME=domain name (maximum: 40 characters)
*SMTPFROM Query or set the email address from which the SMTP message is being sent
(required by some mail servers).
AT*SMTPFROM? to query
AT*SMTPFROM=EMAIL to set
• EMAIL=email address (maximum: 30 characters)
*SMTPSUBJ Query or set the email subject line to use for sending emails.
AT*SMTPSUBJ? to query
AT*SMTPSUBJ=STRING to set
*SMTPPW Query or set the email server password (required by some mail servers).
AT*SMTPPW? to query
AT*SMTPPW=PASSWORD to set
*SMTPUSER Query or set the email account username (required by some mail servers).
AT*SMTPUSER? to query
AT*SMTPUSER=USER to set (maximum: 40 characters)
Time (SNTP) Commands
*SNTP Query or set daily SNTP updates of the system time.
AT*SNTP? to query
AT*SNTP=n to set
•n=0—Off
•n=1—On
*SNTPADDR SNTP Server IP address, or fully-qualified domain name, to use if *SNTP=1.
AT*SNTPADDR? to query
AT*SNTPADDR=[d.d.d.d] or [NAME]
• d.d.d.d=IP Address
• NAME=FQDN
Table D-8: Services AT Commands
Command Description