User guide

Rev 1 Oct.13 351
*SNMPRWCOMMUNITY Read/write community string in SNMPv2 and SNMPv3.
(SNMP equivalent of a password; for example: private)
*SNMPRWUSER Query or set a read/write SNMP username string in SNMPv2 and SNMPv3.
*SNMPRWUSERAUTHTYPE Query or set the read/write authentication type in SNMPv3.
AT*SNMPRWUSERAUTHTYPE? to query
AT*SNMPRWUSERAUTHTYPE=n to set
•n=0—MD5
•n=1—SHA
*SNMPRWUSERSECLVL Query or set the read/write security level in SNMPv3.
AT*SNMPRWUSERSECLVL? to query
AT*SNMPRWUSERSECLVL=n to set
• n=0—none
• n=1—authentication only
• n=2—authentication + privacy
*SNMPRWUSERPRIVTYPE Query or set the read/write privacy type in SNMPv3.
AT*SNMPRWUSERPRIVTYPE? to query
AT*SNMPRWUSERPRIVTYPE=n to set
•n=0—DES
• n=1—AES
SNMP TRAP Configuration
*SNMPENGINEID Specify an identification name string for a SNMP engine in SNMPv3.
(For example: Shark-0012E8)
*SNMPTRAPAUTHTYPE Query or set the SNMP TRAP authentication type in SNMPv3.
AT*SNMPTRAPAUTHTYPE? to query
AT*SNMPTRAPAUTHTYPE=n to set
•n=0—MD5
•n=1—SHA
*SNMPTRAPCOMMUNITY SNMP TRAP community string in SNMPv2 and SNMPv3.
(SNMP equivalent of a password)
*SNMPTRAPDEST Query or set the SNMP TRAP destination in SNMPv2 and SNMPv3.
(for example: 192.168.13.33)
*SNMPTRAPPORT • Query or set the SNMP TRAP port in SNMPv2 and SNMPv3.
1–65535 (Default is 162.)
*SNMPTRAPPRIVTYPE Query or set the SNMP TRAP privacy type in SNMPv3.
AT*SNMPTRAPPRIVTYPE? to query
AT*SNMPTRAPPRIVTYPE=n to set
•n=0—DES
• n=1—AES
Table D-8: Services AT Commands
Command Description