User guide

ALEOS 4.3.4 Software Configuration User Guide
348 4114514
*MODEMNAME
Note: This AT command is only usable if AT*DYNDNS is set to 10 (IP Manager).
Query or set the device name used by IP Manager. (This name is displayed on the
Status > Home page.)
AT*MODEMNAME? to query
AT*MODEMNAME=NAME to set (up to 20 characters long)
• NAME= device name (for example, mydevice)
The value in *DOMAIN provides the domain zone to add to this name.
Example: If *MODEMNAME=mydevice and *DOMAIN=eairlink.com, the device's
fully qualified domain name is mydevice.eairlink.com.
Tip: Each device using IP Manager needs a unique name. I.e., two devices cannot
both be called “mydevice”. One could be named “mydevice1” while the other could
be named “mydevice2”.
SMS
*SMSM2M
*SMSM2M_8
*SMSM2M_u
• AT*SMSM2M sends an SMS in ASCII text (requires quotation marks;
maximum 140 characters)
• AT*SMSM2M_8 sends an 8-bit SMS (requires quotation marks; maximum 140
characters)
• AT*SMSM2M_U sends a unicode SMS (requires quotation marks; maximum
140 characters)
Format:
AT*SMSM2M=“[phone] [ascii message]”
AT*SMSM2M_8=“[phone] [hex message]”
AT*SMSM2M_U=“[phone] [hex message]”
• The phone number can only consist of numbers (NO spaces or other
characters). The phone number should be as it appears in the Last Incoming
Phone Number field.
• Example 1 (US): 14085551212 (including leading 1 and area code)
• Example 2 (US): 4085551212 (ignore leading 1, include area code)
• Example 3 (UK): 447786111717 (remove leading 0 and add country code)
Command Examples:
AT*SMSM2M=”18005551212 THIS IS A TEST” sends in ASCII.
AT*SMSM2M_8="17604053757 5448495320495320412054455354"
sends the message “THIS IS A TEST” as 8-bit data.
AT*SMSM2M_U="17604053757
000102030405060708090a0b0c0d0e0f808182838485868788898A8b8c8d8e8f"
sends the bytes:
00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f
80 81 82 83 84 85 86 87 88 89 8a 8b 8c 8d 8e 8f
Note: Not all cellular Mobile Network Operators support 8-bit or unicode SMS
messages.
Table D-8: Services AT Commands
Command Description