User guide

Rev 1 Oct.13 345
Services
Table D-8: Services AT Commands
Command Description
AirVantage Management System
*AVMS_ENABLE Query or set the AVMS activation status.
AT*AVMS_ENABLE? to query
AT*AVMS_ENABLE=n to set
• n=0—Disable device initiated AVMS management
• n=1—Enable device initiated AVMS management
*AVMS_INTERVAL Query or set the AVMS communication (heartbeat) interval in seconds.
AT*AVMS_INTERVAL? to query
AT*AVMS_INTERVAL= n to set
• n= INTERVAL (in seconds)
*AVMS_NAME Assigns or queries the name to the AirLink device as it appears in AVMS.
AT*AVMS_NAME? to query
AT*AVMS_NAME= n to set
• n= AVMS NAME
*AVMS_SERVER Query or set the AVMS server IP address or FQDN.
AT*AVMS_SERVER? to query
AT*AVMS_SERVER=n to set
• n=IP Address or FQDN of AVMS server
*AVMS_STATUS? Query the AVMS connection status
Low Power
*ENGHRS Query or set the number of hours the engine has been running.
AT*ENGHRS? to query
AT*ENGHRS=n to set
• n= HOURS
Maximum value is 65535.
*POWERMODE? Query the current power state/mode.
AT*POWERMODE? returns:
• Initial—The device is in the initial 5 minutes since power up, so power down
event will be ignored
• On—Regular power on, a power down is not pending
• Low Cancellable—Power down is pending but still Cancellable if the power
down trigger goes away
• Low Pending 1 and Low Pending 3—Power down is pending, any device tasks
are gracefully preparing for the power down
• Low Final—Power down is imminent
• Low—Power is down