User guide

Rev 1 Oct.13 341
*IPSEC1_LOCAL_ADDR
*IPSEC2_LOCAL_ADDR
*IPSEC3_LOCAL_ADDR
*IPSEC4_LOCAL_ADDR
*IPSEC5_LOCAL_ADDR
Query or set the device subnet address for # VPN.
AT*IPSEC[VPN number]_LOCAL_ADDR? returns the device subnet
address
AT*IPSEC[VPN number]_LOCAL_ADDR=[subnet address] to set
*IPSEC1_LOCAL_ADDR_NETMASK
*IPSEC2_LOCAL_ADDR_NETMASK
*IPSEC3_LOCAL_ADDR_NETMASK
*IPSEC4_LOCAL_ADDR_NETMASK
*IPSEC5_LOCAL_ADDR_NETMASK
Query or set the device subnet mask information (24-bit netmask)
AT*IPSEC[VPN number]_LOCAL_ADDR_NETMASK? to query
AT*IPSEC[VPN number]_LOCAL_ADDR=[subnet mask] to set
Default is 255.255.255.0
*IPSEC1_LOCAL_ADDR_TYPE
*IPSEC2_LOCAL_ADDR_TYPE
*IPSEC3_LOCAL_ADDR_TYPE
*IPSEC4_LOCAL_ADDR_TYPE
*IPSEC5_LOCAL_ADDR_TYPE
Query or set the network address type for # VPN.
AT*IPSEC[VPN number]_LOCAL_ADDR_TYPE? to query
AT*IPSEC[VPN number]_LOCAL_ADDR_TYPE=n to set
• n=1 — Use the Host Subnet
• n=5 — Single Address
• n=17 — Subnet Address (default)
*IPSEC1_LOCAL_ID
*IPSEC2_LOCAL_ID
*IPSEC3_LOCAL_ID
*IPSEC4_LOCAL_ID
*IPSEC5_LOCAL_ID
Query or set the local (My Identity) ID for the # VPN.
• If IP is selected as the local (My Identity) type,
AT*IPSEC[VPN number]_LOCAL _ID? returns the WAN IP address
assigned by the Mobile Network Operator
• If FQDN or User FQDN is selected as the local (My Identity) type,
AT*IPSEC[VPN number]_LOCAL_ID? returns the FQDN (for
example [e-mail])
To set the local ID:
AT*IPSEC[VPN number]_LOCAL _ID=[IP address] or [FQDN],
depending on the setting for Local ID (My Identity) type.
*IPSEC1_LOCAL_ID_TYPE
*IPSEC2_LOCAL_ID_TYPE
*IPSEC3_LOCAL_ID_TYPE
*IPSEC4_LOCAL_ID_TYPE
*IPSEC5_LOCAL_ID_TYPE
Query or set the local (My Identity) ID type for the # VPN.
AT*IPSEC[VPN number]_LOCAL_ID_TYPE? to query
AT*IPSEC[VPN number]_LOCAL_ID_TYPE=n to set
• n=1 — IP
•n=2 — FQDN
•n=3 — User FQDN
Note:
• IP (default) allows you to use an IP address
• FQDN allows you to use a fully qualified domain name (FQDN) e. g.,
modemname.domainname.com
• User FQDN allows you to use a user FQDN whose values should
include a username (e.g. [e-mail])
Table D-6: VPN Commands (Continued)
Command Description