User guide

ALEOS 4.3.4 Software Configuration User Guide
332 4114514
*NETPW Set the cellular network account password, if required.
AT*NETPW=PW to set (up to 30 characters)
Note: AT*NETPW? returns a dotted display for privacy.
*NETUID Query or set the cellular network account user ID, if required.
AT*NETUID? to query
AT*NETUID=USER ID (up to 64 bytes)
*NETWDOG Query or set the interval (in minutes) that the network connection watchdog waits for a
network connection. If no connection is established within this interval, the device resets.
AT*NETWDOG? to query
AT*NETWDOG=n to set
• n=0—Disable
• n=1–255 (minutes) default is 120
PING Sends 5 PING to a single address. Returns OK if there is a response: ERROR if there is no
response.
ATPING[ip address or FQDN]
Note: Do not use an equal sign (=) when issuing the command.
Example: ATPINGsierrawireless.com
$QCMIP CDMA and LTE fallback to EV-DO only
Query or set use of Mobile IP (MIP) preferences.
$QCMIP? to query
$QCMIP=n to set
• n=0—Disabled, Simple IP (SIP) only
• n=1—Mobile IP preferred
• n=2—Mobile IP only
Table D-3: WAN/Cellular AT Commands
Command Description