User guide

Rev 1 Oct.13 327
*NETSTATE_RAW? Query numeric value of the network state of the current WAN connection:
• 1—Connecting To Network—The device is in the process of trying to connect to the
cellular network.
• 4—Network Access Denied—Connection rejected.
• 5—Network Ready—WAN is using cellular and is online.
• 7—No Service—The WAN link is down or unavailable
• 9—No SIM or Unexpected SIM status—No SIM, SIM installed incorrectly, or another
SIM error.
• 11—Awaiting Provisioning—EV-DO device without an account and hasn't had an
account or the provisioning has been erased from the radio.
• 12—Data Connection Failed - Waiting to Retry—The device failed to connect, and it is
waiting a set time interval before it attempts to reconnect.
Or
• 12—Provisioning... —An EV-DO device in the process of writing the account data to
the radio.
• 13—SIM Locked, but bad SIM PIN.
• 14—SIM PIN incorrect 3 attempts left.
• 15—SIM PIN incorrect 2 attempts left.
• 16—SIM PIN incorrect 1 attempts left.
• 17—SIM PIN incorrect 0 attempts left.
• 18—SIM Blocked, Bad unlock code.
• 19—SIM Blocked, unblock code incorrect.
• 27—Network Ready - Wi-Fi—WAN is using WiFi Client and is connected.
• 30—Not Connected-Waiting for Activity — "Always On Connection" has been
disabled and the device is waiting for outgoing traffic to mount the PDP context.
• 31—Not Connected-Radio Connect off—the RADIO_CONNECT AT command was
entered, and the PDP context is manually disabled.
+PRL? CDMA and LTE fallback to EV-DO only
Query CDMA Preferred Roaming List (PRL) version.
*PRLSTATUS? CDMA only
Query the status of the most recent PRL update
• n=0—None (No update)
• n=1—In progress
• n=2—Update successful
The return of any other value indicates that the update failed.
*USBNETSTATE? Query the status of the USB connection.
AT*USBNETSTATE? returns:
• None—There are no USB connections to the AirLink device.
• 8 MB/s Half Duplex—There is a USB connection to the device.
Table D-2: Status AT Commands (Continued)
Command Description