User guide

ALEOS 4.3.4 Software Configuration User Guide
326 4114514
*NETSTATE? Query the network state of the current WAN connection.
AT*NETSTATE? returns:
• Connecting To Network—The device is in the process of trying to connect to the
cellular network.
• Network Authentication Fail—Authentication to the cellular network has failed. Verify
settings to activate the device.
• Data Connection Failed—The device failed to connect, and it is now waiting a set time
interval before it attempts to reconnect. Verify settings to activate the device.
• Network Negotiation Fail—Network connection negotiation failed. This is usually
temporary and often clears up during a subsequent attempt.
• Network Ready—The device is connected to the 1x cellular network and ready to send
data.
• Network Ready - Wi-Fi —Device is connected to a Wi-Fi network in client mode.
• Network Dormant—The device is connected to the 1x cellular network, but the link is
dormant. It will be woken up when data is sent or received.
• No Service—There is no cellular network detected.
• Hardware Reset—The internal module is being reset. This is a temporary state.
• No SIM or Unexpected SIM status—No SIM, SIM installed incorrectly, or another SIM
error.
• Awaiting Provisioning—EV-DO device without an account and hasn't had an account
or the provisioning has been erased from the radio.
• Provisioning... —An EV-DO device in the process of writing the account data to the
radio.
• Not Connected-Waiting for Activity — “Always On Connection” has been disabled and
the device is waiting for outgoing traffic to mount the PDP context.
• Not Connected-Radio Connect off—the RADIO_CONNECT AT command was
entered, and the PDP context is manually disabled.
• SIM Locked, but bad SIM PIN.
• SIM PIN incorrect 3 attempts left.
• SIM PIN incorrect 2 attempts left.
• SIM PIN incorrect 1 attempts left.
• SIM PIN incorrect 0 attempts left.
• SIM Blocked, Bad unlock code.
• SIM Blocked, unblock code incorrect.
Table D-2: Status AT Commands (Continued)
Command Description