User guide

ALEOS 4.3.4 Software Configuration User Guide
278 4114514
If you are using a DUN connection with any other network connection (such as
Ethernet or Wi-Fi), you may need to use the route command in Windows to set up
a static route through the device to access the location remotely over the PPP link
and the cellular network. This guide does not provide information on the route
command. Consult your network administrator for information on properly
configuring routing.
Create a new network connection.
1. Select Start > Control Panel > Network and Sharing Center.
Figure A-16: Network and Sharing Center Window
2. Select Set up a new connection or network.