User guide

Rev 1 Oct.13 267
A
A: Windows Dial-up Networking (DUN)
Dial-up Networking (DUN) allows a computer or other device to use
the serial port on your AirLink device to connect to the Internet or
private network using PPP just like an analog device using a
standard phone line.
Note: Dial-up Networking is not available for the AirLink LS300.
Caution: To install any driver on your computer, you may need to be logged
in as Administrator or have Administrator privileges for your login.
Microsoft Windows 7 is used in the examples below. The device
driver installation and DUN setup and configuration is similar in other
Microsoft Windows operating systems, including Windows XP and
Windows CE.
Note: If your device is new, or has recently been reset to factory default
settings, ensure that the device has been on air at least once before being
used with a DUN connection.
Installing a Device Driver
Connect the AirLink device
1. Connect the device to the computer with a DB-9 cable from one
RS-232 port to the other.
2. Log in to ACEmanager.
3. Go to Serial > Port Configuration.
4. Set the DB9 Serial Echo field to Disable.
5. Reboot.
Note: You need to set the DB9 Serial Echo field echo to Disable any time
you want to set up a PPP connection.